Sigenergy SigenStor 10.0 Home Battery – Complete Package
Sigenergy SigenStor 10.0 Home Battery – Complete Package
- Capacity9 – 54 kWh
- Controller5 – 25 kW
excl. VAT
Shipping to Austria
- Shipping to Austria · €150,00 excl. VAT (on a pallet, 78.0 kg) · all countries
- Pick up in Rotterdam · free, by appointment, Osakastraat 17
- Ordering for a company? · log in with your trade account or enter your VAT number in the cart
Couldn't load pickup availability
About this product
The SigenStor 10.0 complete package is a modular home battery system from Sigenergy in which the hybrid inverter, energy management and battery are combined in one stacked tower. The package contains the Sigen Energy Controller, one 9.04 kWh battery module, a smart meter and a ground mount, so you are complete right...Read more
The SigenStor 10.0 complete package is a modular home battery system from Sigenergy in which the hybrid inverter, energy management and battery are combined in one stacked tower. The package contains the Sigen Energy Controller, one 9.04 kWh battery module, a smart meter and a ground mount, so you are complete right away. Later you can click up to six modules under the same controller.
What you use it for
SigenStor is intended for households that want to store more than 10 kWh per day, have a heat pump or EV charger, or use (or want to use) a three-phase connection. The Energy Controller is available in single-phase (3 – 12 kW) and three-phase (5 – 30 kW) versions; in this package you choose 5 kW (single-phase) or 6 to 25 kW (three-phase). It has two to four MPP trackers to which you connect your solar panels directly. In backup power mode, the controller delivers double its nominal power for 10 seconds to start heavy appliances.
What makes it special
- LiFePO4 battery modules, IP66, operating temperature -20 to 55 °C; floor or wall mounting.
- Stackable installation in approx. 15 minutes and commissioning in approx. 5 minutes.
- Five layers of protection for battery and system, with one-click diagnostics of the entire system.
- Communication via Wi-Fi, Ethernet, RS485 and optionally 4G.
- Prepared for V2X (bidirectional charging of an electric car) with the Sigen EV DC charging module.
Backup power (optional)
If you want to keep going during a power cut, add the Sigen Energy Gateway Home. It switches the whole house or part of it over to battery and solar without interruption (0 ms), and protects the grid against back-feeding within 350 ms. The gateway is available in 12 kW (single-phase) and 30 kW (three-phase). Have the installation and connection to the electrical panel carried out by a certified installer.
Specifications
- Capacity per module
- 9.04 kWh
- Maximum capacity
- 54 kWh (6 modules)
- Battery type
- LiFePO4
- Controller
- 5 – 25 kW, single- or three-phase
- Included
- controller, battery module, smart meter, ground mount
- Backup power
- optional with gateway
How to connect it
- Via the Sigen Energy ControllerThe hybrid inverter is included in the package: 5 kW (single-phase) or 6 to 25 kW (three-phase). You connect your solar panels directly to the MPP trackers.
- By an installerThe battery is permanently connected to the inverter and the electrical panel. This is done by a certified installer, usually within half a day.
- Energy meterThe Sigen Sensor (three-phase smart meter) is included in the package and goes in the electrical panel; with it, the system optimises for self-consumption and dynamic prices.
- PlacementTower on the supplied Foot Mount, indoors or outdoors (IP66, -20 to 55 °C). Wall mounting is also possible.
When 800 W and when full power?
The power to your home depends on two things: the Energy Controller (5 to 25 kW) and the number of modules (3 kW continuous, 4.5 kW peak per module). With one BAT 10.0 module, the battery therefore supplies 3 kW; with six modules up to 18 kW, enough for a heat pump, EV charger and household at the same time.
Charging takes place directly from your solar panels via the controller's MPP trackers, or from the grid at low dynamic prices. With the optional Sigen Energy Gateway you get backup power for the whole house; in backup power mode, the controller delivers double the power for 10 seconds to start heavy appliances.
- Hard-wired via the inverter, by an installer25.000 W Also washing machine, oven or induction from the battery. Charges at 25.000 W
What this battery can do
- Inverter and battery in one towerEnergy Controller, energy management and battery modules stacked on one Foot Mount
- AI energy managementOptimises for your consumption, the weather and dynamic energy prices
- Solar panels directly on itTwo to four MPP trackers on the controller
- Modular expansionClick on modules later, BAT 6.0 and 10.0 can be mixed
- Installation in 15 minutesStacking without cables, commissioning in approx. 5 minutes
- Backup power possibleWith the Sigen Energy Gateway, the house switches over without interruption
- Prepared for V2XBidirectional charging of an electric car with the Sigen EV DC charging module
- IP66 and 10-year warrantyIndoors or outdoors, works from -20 to 55 °C
Questions about this product
Does this system need to be connected by an installer?
Does this work with my existing solar panels?
How much energy does this module store?
Does it work during a power cut?
What about the warranty?
When will my order be delivered?
Manufacturer's warranty
The full manufacturer's warranty applies. For a claim, mail info@multi-solar.nl with your order number.
Shipped from Rotterdam
As a parcel or on a pallet, depending on the weight. See the costs per country.
Pick-up in Rotterdam
Free, by appointment, at Osakastraat 17, 3047 AK Rotterdam.