Dyness DL5.0C Home Battery – 5.12 kWh (low-voltage)
Dyness DL5.0C Home Battery – 5.12 kWh (low-voltage)
- Capacity5.12 kWh
- Nominal voltage51.2 V
excl. VAT
Shipping to Austria
- Shipping to Austria · €150,00 excl. VAT (on a pallet, 49.9 kg) · all countries
- Pick up in Rotterdam · free, by appointment, Osakastraat 17
- Ordering for a company? · log in with your trade account or enter your VAT number in the cart
Couldn't load pickup availability
About this product
The Dyness DL5.0C is a low-voltage (51.2 V) home battery with 5.12 kWh capacity. It is a compact entry-level module of 558 × 545 × 150 mm that you can hang on the wall, place on the floor, stack or install in a 19-inch rack. You connect it to a compatible low-voltage hybrid inverter and store your solar power for th...Read more
The Dyness DL5.0C is a low-voltage (51.2 V) home battery with 5.12 kWh capacity. It is a compact entry-level module of 558 × 545 × 150 mm that you can hang on the wall, place on the floor, stack or install in a 19-inch rack. You connect it to a compatible low-voltage hybrid inverter and store your solar power for the hours when the panels are not producing anything.
What you use it for
The DL5.0C is intended for homes and small businesses that want to start with one 5.12 kWh module and expand later: you can connect up to 50 units in parallel, from 5.12 to 256 kWh. The battery discharges at 1C, so the full 100 A (approximately 5.1 kW) is immediately available for several appliances at the same time. Due to the IP20 housing, you place it indoors, for example in the meter cupboard area, storage room or garage.
What makes it special
- LiFePO4 cells with ≥ 6,000 cycles and a 10-year warranty.
- Communication via CAN, RS485 and RS232, compatible with inverters from SMA, Victron, Solis, GoodWe, Growatt, Deye, Luxpower and Solplanet, among others.
- Optional heating function that lets you charge even at -20 °C.
- Protected against short circuits and overvoltage.
- Optional Wi-Fi module for monitoring.
Installation
The module weighs 49.9 kg; hang or place it with two people. Have the connection to the inverter and the electrical panel done by an electrician and check in advance whether your inverter has the DL5.0C on its compatibility list.
Specifications
- Capacity
- 5.12 kWh (100 Ah)
- Nominal voltage
- 51.2 V
- Operating voltage
- 44.8 – 57.6 V
- Cell technology
- LiFePO₄
- Max. charge/discharge current
- 75 A charging / 100 A discharging (1C, approx. 5.1 kW)
- Depth of discharge (DoD)
- 90%
- Dimensions (W × D × H)
- 558 × 545 × 150 mm
- Weight
- 49.9 kg
- Protection rating
- IP20 (indoor installation)
- Operating temperature
- discharging -20 – 55 °C, charging 0 – 55 °C (-20 – 55 °C with optional heating)
- Cycles
- ≥ 6,000
- Warranty
- 10 years
- Communication
- CAN / RS485 / RS232
- Parallel connection
- up to 50 units (max. 256 kWh)
How to connect it
- Via a low-voltage hybrid inverter51.2 V battery with CAN/RS485/RS232, according to Dyness compatible with SMA, Victron, Solis, GoodWe, Growatt, Deye, Luxpower and Solplanet, among others. Check your inverter's compatibility list in advance.
- By an installerThe battery is permanently connected to the inverter and the electrical panel. This is done by a certified installer, usually in half a day.
- PlacementOn the wall, on the floor, stacked or in a 19-inch rack; 558 × 545 × 150 mm, 49.9 kg. IP20, so indoors only (meter cupboard area, storage room, garage).
When 800 W and when full power?
The DL5.0C discharges at 1C: the full 100 A, approximately 5.1 kW, is immediately available via your inverter. That is enough to run the household plus one large appliance on your own solar power in the evening.
Charging takes place at up to 75 A from your solar panels via the hybrid inverter or from the grid; with the optional heating also below 0 °C. Backup power depends on your inverter.
- Hard-wired via the inverter, by an installer5.100 W Also washing machine, oven or induction from the battery
What this battery can do
- 5.12 kWh per moduleEntry-level module, parallel up to 50 units (256 kWh)
- 1C dischargeApprox. 5.1 kW immediately available
- LiFePO4 cellsAt least 6,000 cycles, 10-year warranty
- Widely compatibleCAN, RS485 and RS232 to the well-known inverter brands
- Flexible mountingWall, floor, stack or 19-inch rack
- Optional heatingCharging down to -20 °C
- ProtectedAgainst short circuits and overvoltage
Questions about this product
Does this system need to be connected by an installer?
Does this work with my existing solar panels?
How much energy does this system store?
Can this system be placed outdoors?
How long does the battery last?
How much space do I need?
What warranty do I get?
When will my order be delivered?
Manufacturer's warranty
The full manufacturer's warranty applies. For a claim, mail info@multi-solar.nl with your order number.
Shipped from Rotterdam
As a parcel or on a pallet, depending on the weight. See the costs per country.
Pick-up in Rotterdam
Free, by appointment, at Osakastraat 17, 3047 AK Rotterdam.